Biological oriented preparation technique (BOPT) for tooth preparation: A systematic review and meta-analysis.

Purpose: This systematic review is aimed to evaluate in fixed prosthodontics treated teeth, the effect of the BOPT on periodontal health compared to the horizontal preparation technique using a chamfer finishing line or to the baseline. Methods: The electronic databases Cochrane Central Library, PubMed, Scopus, and ScienceDirect were searched based on specific MeSH keywords. The Randomized controlled clinical trials (RCTs) and prospective clinical trials on BOPT printed in English up to July 2022 were selected. Screening, selection, and data extraction were done. The studies were assessed for risk of bias, and descriptive and meta-analyses were performed. Results: Eight studies were included in the systematic review and only three RCTs were involved in the meta-analysis. Two RCTs were assessed as low risk while one has some concerns. were grouped as good, fair, and poor based on NOS. Three of the prospective studies were considered to be of good quality and one study was fair. The meta-analysis revealed no statistically significant difference in the effect of BOPT and chamfer preparation on periodontal health status and success rate (P > 0.05). Conclusions: Considering the limitation of this review, the BOPT is comparable to chamfer preparation and it resulted in an acceptable effect to maintain periodontal health with a high success rate. However, more evidence is required to support these findings.

Middle mesial canal in mandibular first molar: A narrative review.

Purpose: This review aimed to assess the incidence, anatomical characteristics, identification, and clinical management using conventional techniques and advanced tools to manage MMCs successfully. Methods: Medline/PubMed and Scopus databases were searched using "Middle mesial canal," "Middle mesial root canal," OR "Accessory mesial canal" keywords from 1 January 1970 and 1 February 2023. The most pertinent articles were chosen for the review from the retrieved articles. In addition, relevant articles were added by manually searching the list of references. Results: The incidence of MMC is noticeable in younger people, and the confluent canal is the most common type. The majority of MMCs merged with mesiobuccal (MB) canals rather than mesiolingual (ML) canals. Clinical management could be employed using the standard endodontics protocol, and recent radiography technologies, magnification, rotary, and obturation materials can facilitate the procedures. Conclusion: The possibility of the incidence of MMC is not unusual. Detection and thorough debridement followed by obturation of the canal could increase the success rate of clinical outcomes.

Attitude and practice of regenerative endodontic procedures among endodontists and paediatric dentists: A multinational survey from 13 countries.

BACKGROUND: Regenerative endodontics (RET) refers to biologically based procedures that aim to restore damaged tooth structures and reinstate the pulp-dentine complex to its normal physiological state. AIM: The purpose of this study was to examine the attitudes and practices of endodontists and paediatric dentists regarding RET. DESIGN: A survey was conducted among endodontists and paediatric dentists from 13 countries. A number of factors were evaluated, including frequency of RET application, followed guidelines, disinfection techniques, intracanal medication type, scaffold type, preferred coronal seal material, and follow-up period. RESULTS: Among the 1394 respondents, 853 (61.2%) and 541 (38.8%) were endodontists and paediatric dentists, respectively. Almost half (43%) of participants have not performed RET yet. The American Association of Endodontics guideline (47.3%) was selected as the primary source for the clinical protocol. The most frequently selected irrigant solution was 1.5%-3% NaOCl at the first (26.1%) and second (13.6%) sessions. A blood clot (68.7%) and MTA (61.9%) were the most frequently selected scaffold type and coronal barrier. Most participants preferred a 6-month follow-up period. CONCLUSION: According to this survey, deviations exist from current RET guidelines regarding all aspects evaluated. Standardizing clinical protocols and adhering to available guidelines would help to ensure more predictable outcomes.

Evaluation of interfacial adaptation and penetration of bioceramic-based sealers in oval root canals: A confocal laser scanning microscope study.

To assess the interfacial adaptation and penetration depth of three different bioceramic-based sealers (CeraSeal, EndoSeal MTA, Nishika Canal Sealer BG) compared to an epoxy resin-based sealer (AH Plus) in oval root canals. Fourty extracted single-rooted mandibular premolar with oval canal were prepared and randomly allocated according to the obturation into; CeraSeal, EndoSeal MTA, Nishika Canal Sealer BG and AH Plus. The roots were sectioned at 3, 6 and 9 mm from the apex. The sealer adaptation and the penetration depth were evaluated under confocal laser scanning microscope. One-way ANOVA and Repeated measure ANOVA were used to statistically analyze the data. Nishika Canal Sealer BG showed significantly higher sealer adaptation than EndoSeal MTA (P < .001) at apical and middle thirds. Meanwhile, AH Plus showed significantly higher sealer adaptation than EndoSeal MTA (P = 0.011) at middle third. For sealer penetration, Nishika Canal Sealer BG showed the longest sealer penetration that was significant compared to AH Plus (P < .001) and EndoSeal MTA (P < .001) whereas CeraSeal was significantly higher than EndoSeal MTA (P = 0.029) at coronal third. For AH Plus, there was a significant less sealer penetration at coronal third compared to apical and middle thirds (P < .05). Whereas for EndoSeal MTA, the coronal third has significant less penetration compared to the middle third (P = 0.032). Endoseal has the lowest adaptation and penetration depth. Nishika Canal Sealer BG has better adaptation and penetration depth using single cone obturation technique in oval canal. RESEARCH HIGHLIGHTS: All the tested root canal sealers have some percentage of gaps and vary in their penetration capability into dentinal tubules. Nishika Canal Sealer BG has significantly better sealer adaptation to root dentinal walls than that of EndoSeal MTA at the apical and middle third but not significantly different from other type of sealers used. Nishika Canal Sealer BG has significantly better penetration depth than AH Plus and EndoSeal MTA at the coronal third of radicular dentin.

In-vitro evaluation of the effectiveness of polyphenols based strawberry extracts for dental bleaching.

To formulate a dental bleaching agent with strawberry extract that has potent bleaching properties and antimicrobial efficacy. Enamel specimens (3 × 3 × 2 mm3) were prepared. Quaternary Ammonium Silane (CaC2 enriched) was homogenized with fresh strawberries: Group 1: supernatant strawberry (10 g) extract < Group 2: supernatant strawberry (10 g) extract + 15%HA (Hydroxyapatite) < Group 3: supernatant strawberry (10 g) extract + 15% (HA-2%k21) < Group 4: supernatant strawberry (20 g) extract only (20 g strawberries) < Group 5: supernatant strawberry (20 g) extract + 15% HA < Group 6: supernatant strawberry (20 g) extract + 15% (HA-2%K21) < Group 7: In-office Opalescence Boost 35%. Single-colony lactobacillus was examined using confocal microscopy identifying bacterial growth and inhibition in presence of bleaching agents using 300 µL aliquot of each bacterial culture. Images were analysed by illuminating with a 488 nm argon/helium laser beam. Colour difference (∆E00) was calculated using an Excel spreadsheet implementation of the CIEDE2000 colour difference formula and colour change measured between after staining and after bleaching. Scanning electron microscope was used to image specimens. Raman spectra were collected, and enamel slices were used for STEM/TEM analysis. HPLC was used for strawberry extract analysis. Nano-indentation was performed and X-ray photoelectron spectroscopy. Antioxidant activity was determined along with molecular simulation. hDPSCs were expanded for Alamar Blue Analysis and SEM. Mean colour change was significantly reduced in group 1 compared to other groups (p < 0.05). CLSM showed detrimental effects of different strawberry extracts on bioflms, especially with antimicrobial (p < 0.05). Groups 1, 2 and 3 showed flatter/irregular surfaces with condensation of anti-microbial in group 3. In strawberry specimens, bands predominate at 960 cm-1. HPLC determined the strawberry extracts content. Molecular simulation verified interaction between calcium and polyphenol components. XPS peak-fitted high-resolution corresponding results of Ca2p3/2 and Ca2p1/2 for all k21 groups. Combination of 10 g strawberry extract supernatant and 15% (hydroxyapatite 2%k21) improved the whiteness and provided additional antimicrobial potential. The novel strawberry extract and antimicrobial based dental formulation had immediate bleaching effect without promoting significant changes in enamel morphology.

Pulpal and Periapical Status of the Vital Teeth Used as Abutment for Fixed Prosthesis-A Systematic Review and Meta-Analysis.

PURPOSE: This is a systematic review to identify the incidence of pulp necrosis and/or periapical changes among vital teeth which are used as an abutment for crown and fixed partial dentures (FPDs). MATERIALS AND METHODS: Two reviewers independently searched two electronic databases, PubMed and Scopus. The search was complemented from references of included studies and published reviews. Studies published in the English language through January 2021 that had assessed and documented the clinical and radiographic failure of crown or FPD in vital permanent teeth due to pulpal or periapical pathology with a follow-up of at least 12 months were selected. Data screening, data collection and extraction of data was performed. Quality of studies involved was analyzed using the Newcastle-Ottawa Quality Assessment Scale for cohort studies. Meta-analysis was done using random effects model. Publication bias was assessed using funnel plots. RESULTS: Electronic searches provided 10,075 records among which 20 studies were selected for systematic review and 7 studies were selected for meta-analysis. With respect to quality assessment, all the studies involved were considered as high quality as the score in scale ranged between 6 and 9 as per the Newcastle-Ottawa Quality Assessment Scale for cohort studies. The meta-analyses showed that there was no statistically significant difference in the incidence of the loss of pulp vitality or pulp necrosis through clinical and radiographic examination with the follow up period of 5 years: p < 0.001, 95% CI: 0.96-1.00, I2 = 77.84%; 10 years: p < 0.001, 95% CI: 0.88-0.95, I2 = 93.59%; 15 years: p < 0.001, 95% CI: 0.92-0.96, I2 = 94.83%; and 20 years: p < 0.001, 95% CI: 0.94-0.96, I2 = 95.01%. CONCLUSIONS: The meta-analysis revealed clinical and radiographic success rate ranging between 92% to 98% at different follow up periods ranging between 5 years and 20 years. Future high-quality randomized clinical controlled trials with a larger population are required to confirm the evidence as only observational studies were considered in this paper.

Spectrophotometric evaluation of coronal discoloration induced by bioceramic root canal filling materials / Evaluación espectrofotométrica de la decoloración coronal inducida por materiales biocerámicos de obturación del conducto radicular

The aim of this study is to evaluate the crown discoloration induced by bioceramic root canal filling materials (OrthoMTA and iRoot SP) compared to AH Plus. Material and Methods: Sixty intact mandibular single rooted premolars were sectioned 2 mm below the cemento-enamel junction, prepared, and randomly assigned into four groups according to the root filling materials: OrthoMTA, iRoot SP, AH Plus and unfilled. Results: Before placement of the materials in the pulp chamber and the coronal third of the root, the spectral reflectance lines of the crowns were recorded by a digital spectrophotometer at baseline, and after filling at 1 week and 1, 3 and 6 months and ∆Ε values were calculated. All materials used induced clinically perceptible crown discoloration (∆Ε>3.7) and no significant difference was detected between these materials (p>0.05). Regardless of the material, discoloration progressed significantly within the three months (p<0.05) however, at 6 months, the discoloration reduced for AH Plus and no further increase for bioceramic materials was detected. Conclusion: Bioceramic root filling materials tested induced clinically perceptible crown discoloration and their application in the esthetic zone should be performed with caution.

Objetivo: El objetivo de este estudio es evaluar la decoloración de la corona inducida por materiales biocerámicos de obturación del conducto radicular (OrthoMTA e iRoot SP) en comparación con AH Plus. Material y Métodos: Se seccionaron sesenta premolares mandibulares de raíz única intactos, 2 mm por debajo de la unión cemento-esmalte, se prepararon y se asignaron al azar en cuatro grupos de acuerdo con los materiales de obturación radicular: OrthoMTA, iRoot SP, AH Plus y sin relleno. Resultados:Antes de la colocación de los materiales en la cámara pulpar y el tercio coronal de la raíz, las líneas de reflectancia espectral de las coronas se registraron con un espectrofotómetro digital al inicio del estudio, y a la semana 1, así como a 1, 3 y 6 meses, y los valores ?? fueron calculados. Todos los materiales utilizados indujeron una decoloración de la corona clínicamente perceptible (??> 3,7) y no se detectaron diferencias significativas entre estos materiales (p> 0,05). Independientemente del material, la decoloración progresó significativamente dentro de los tres meses (p<0.05); sin embargo, a los 6 meses, la decoloración se redujo para AH Plus y no se detectó ningún aumento adicional para los materiales biocerámicos. Conclusiones: Los materiales biocerámicos de obturación radicular probados indujeron una decoloración de la corona clínicamente perceptible y su aplicación en la zona estética debe realizarse con precaución.

Spectrophotometric evaluation of the efficacy of natural versus commercial bleaching agents.

PURPOSE: To compare the bleaching efficacy of in-office (Opalescence), professional home (LumiBrite), over the counter (WhiteLight) and natural (strawberry extract) bleaching agents. METHODS: 80 teeth were selected and divided into two groups which were stained with black coffee and red wine respectively. The stained specimens were subdivided into four subgroups to be bleached with Opalescence, LumiBrite, WhiteLight and strawberry extract. Color measurements were made using spectrophotometer at baseline level, after staining, after bleaching and 1 week after bleaching. The ΔE00 was calculated post bleaching (ΔE001), after 1-week follow up (ΔE002) and color changes between 1-week follow up and baseline (ΔE003). Data were analyzed by paired t-test and ANOVA with a significant difference of P< 0.05. RESULTS: Paired t-test showed significant differences in ΔE001 and ΔE002 for both stained specimens (P< 0.001). For black coffee stained specimens, Whitelight had significantly higher ΔE002 compared to the other bleaching agents (P< 0.05). For red wine stain, Whitelight also showed the significantly lowest ΔE001 (P< 0.001) and the highest ΔE002 (P< 0.001) compared to other groups. LumiBrite showed the significantly lowest ΔE003 for red wine stained specimens (P< 0.05). Whitelight had the poorest bleaching efficacy with deterioration effect after 1-week follow up. Opalescence, LumiBrite and strawberry extract had clinically perceptible and comparable bleaching efficacy. Strawberry extract appeared to be a potential natural bleaching agent with a desirable effect. CLINICAL SIGNIFICANCE: Commercial tooth bleaching agents can cause several undesirable side effects such as damage to enamel, hypersensitivity and even affecting the pulp. Strawberry extract is a natural, effective bleaching agent that may have reduced side effects.

Effect of Intracanal Medicaments on the Bond Strength of Bioceramic Root Filling Materials to Oval Canals.

AIM: This study aimed to evaluate the effect of the prior application of intracanal medicaments on the bond strength of OrthoMTA (mineral trioxide aggregate) and iRoot SP to the root dentin. MATERIALS AND METHODS: Thirty single-rooted mandibular premolars were standardized and prepared using ProTaper rotary files. The specimens were divided into a control group and two experimental groups receiving Diapex and Odontopaste medicament, either filled with iRoot SP or OrthoMTA, for 1 week. Each root was sectioned transversally, and the push-out bond strength and failure modes were evaluated. The data were analyzed using Kruskal Wallis and Mann-Whitney U post hoc test. RESULTS: There was no significant difference between the bond strength of iRoot SP and OrthoMTA without medicaments and with the prior placement of Diapex (p value > 0.05). However, iRoot SP showed significantly higher bond strength with the prior placement of Odontopaste (p value < 0.05). Also, there was no association between bond strength of OrthoMTA with or without intracanal medicament (p value > 0.05) and between failure mode and root filling materials (p value > 0.05). The prominent failure mode for all groups was cohesive. CONCLUSION: Prior application of Diapex has no effect on the bond strength of iRoot SP and OrthoMTA. However, Odontopaste improved the bond strength of iRoot SP. CLINICAL SIGNIFICANCE: Dislodgment resistance of root canal filling from root dentin could be an indicator of the durability and prognosis of endodontic treated teeth.

The effect of fiber post location on fracture resistance of endodontically treated maxillary premolars.

BACKGROUND: There is no sufficient literature on the effect of post location on endodontically treated premolar teeth with 2 roots. OBJECTIVES: The aim of the study was to evaluate the effect of fiber post location on fracture resistance and failure mode of endodontically treated premolars with 2 roots. MATERIAL AND METHODS: Fifty extracted maxillary first premolars with 2 roots were divided randomly into 5 groups. Group 1 was comprised of sound teeth, which received only metal crowns (control). Teeth from groups 2, 3, 4, and 5 were decoronated 2 mm above the cementoenamel junction (CEJ) and were endodontically treated. No post was placed in group 2 teeth. Teeth from groups 3, 4 and 5 were given a fiber post placed in the buccal canal, palatal canal, and both buccal and palatal canals, respectively. All teeth in groups 2, 3, 4, and 5 were built up with composite and full coverage metal crowns. A compressive static load was applied at an angle of 25° to the crowns with a crosshead speed of 0.5 mm/min, until fracture. RESULTS: One-way analysis of variance (ANOVA) showed significant differences among the groups (p = 0.002). A post hoc test showed significantly lower fracture resistance of group 4 compared to group 5 (p = 0.011). Furthermore, group 2 had significantly less fracture resistance compared to group 1 (p = 0.021) and group 5 (p = 0.002). According to Fisher's exact test, different post locations are non-significantly associated with fracture mode (p = 0.256). CONCLUSIONS: Fiber post location has a significant effect on fracture resistance of severely damaged, endodontically treated maxillary premolars with 2 roots. However, post placement in the palatal root is preferred, as it maintains the restorability of the tooth.

Push-Out Bond Strength of Experimental Apatite Calcium Phosphate Based Coated Gutta-Percha.

OBJECTIVES: To evaluate the push-out bond strength of experimental apatite calcium phosphate coated gutta-percha (HAGP) compared to different commercially available coated gutta-percha root obturation points. METHODS: Extracted teeth were selected and instrumented using ProTaper rotary files. The canals were assigned into five equal groups and obturated using matching single cone technique as follows: EndoREZ cones and EndoREZ sealer, Bioceramic Endosequence gutta-percha (BCGP) with Endosequence BC sealer, Active GP with Endosequence BC sealer (ActiV GP), conventional GP with Endosequence BC sealer, and HAGP with Endosequence BC sealer. Each root was sectioned transversally at the thickness of 1±0.1 mm to obtain 5 sections (n=25 per group). The specimens were subjected to push-out test using a Universal Test Machine at a loading speed of 0.5 mm/ min. Failure modes after push-out test was examined under stereomicroscope and the push-out data were analyzed using ANOVA and the post hoc Dunnett T3 test (p = 0.05). RESULTS: The highest mean bond strength was yielded by HAGP followed by BCGP, ActiV GP, conventional GP, and EndoREZ. There were significant differences between EndoREZ and all other groups (p<0.001). The prominent failure mode of HAGP was mixed mode, whereas EndoREZ exhibited adhesive failure mode. Conventional GP, ActiV GP, and BCGP showed cohesive failure mode. CONCLUSION: HAGP showed promising results to be used as root canal filling material in combination with bioceramic sealer.

Fracture resistance of three different all-ceramic crowns: In vitro study.

PURPOSE: To evaluate the fracture resistance and failure mode of three different all-ceramic crowns; CEREC Bloc, IPS e.Max Press and Cercon in a simulated clinical situation. METHODS: 30 extracted maxillary premolars were prepared and randomly assigned to three groups equally according to the type of crown used. The first was the CEREC group: monolithic feldspathic crowns (CEREC Blocs). The second was the E.Max group: monolithic lithium disilicate crowns (IPS e.Max Press). The third group was the Cercon group: bilayered partially stabilized zirconia crowns (Cercon). All crowns were cemented using dual-cured resin cement (ParaCore). The specimens were then subjected to thermocycling (5-55°C/500 cycles) and loaded to failure at an angle of 45° to the occlusal surface of the crown. Failure data was statistically analyzed using one-way ANOVA and Tukey's HSD post hoc test at α= 0.05. Fractographic analysis was performed to determine the fracture modes of the failed specimens. RESULTS: The mean fracture values for CEREC, E.Max and Cercon groups were 387± 60 N, 452 ± 86 N, and 540 ± 171 N, respectively. Significant differences were found between CEREC and Cercon groups (P< 0.05). Catastrophic fracture within the ceramic crown was the major failure mode of the CEREC group. For E.Max and Cercon groups, the major failure mode was exhibiting severe tooth fracture while the ceramic crown remained intact. CLINICAL SIGNIFICANCE: CEREC, IPS e.Max Press and Cercon crowns are clinically applicable as they exceeded the normal masticatory forces. However, the CEREC crown is preferred as it maintains the integrity of the natural abutment.

Fracture resistance of endodontically-treated mandibular molars restored with different intra-radicular techniques.

PURPOSE: To evaluate fracture resistance and failure mode of endodontically-treated mandibular molars restored with different intra-radicular techniques. METHODS: 75 human mandibular molars were randomly divided into five equal groups. Teeth were standardized, endodontically-treated and restored according the assigned group as follows: amalgam core only, prefabricated titanium post in the distal canal and amalgam core, composite core only; fiber post in the distal canal and composite core. One group of untreated sound teeth was used as a control. Non-precious metal crowns were fabricated and cemented on the prepared specimens with Rely X U200 resin cement. All specimens were subjected to a compressive load at crosshead speed 0.5 mm/minute, 25° to the long axis of the tooth. Failure loads and modes were recorded. RESULTS: Mean failure loads among the groups were significantly different (P= 0.035). Post-hoc multiple pair-wise comparisons revealed the amalgam core and composite core groups produced significantly lower fracture resistance than the control group (P= 0.041 and P= 0.025, respectively) and no significant differences among the different intra-radicular techniques (P> 0.05). The composite core with fiber post and amalgam core with titanium posts showed the highest percentage of favorable failures (67%) and non-favorable failures (87%) respectively. CLINICAL SIGNIFICANCE: The composite core with fiber post is the most appropriate intraradicular restoration in cases of severely compromised molars.

An in vitro Comparison of Bond Strength of Different Sealers/Obturation Systems to Root Dentin Using the Push-Out Test at 2 Weeks and 3 Months after Obturation.

OBJECTIVE: To evaluate the push-out bond strength and failure modes of different sealers/obturation systems to intraradicular dentin at 2 weeks and 3 months after obturation compared to AH Plus®/gutta-percha. MATERIALS AND METHODS: A total of 180 root slices from 60 single-canal anterior teeth were prepared and assigned to 5 experimental groups (n = 36 in each group), designated as G1 (AH Plus®/gutta-percha), G2 (TotalFill BC™ sealer/BC-coated gutta-percha), G3 (TotalFill BC™ sealer/gutta-percha), G4 (EndoREZ® sealer/EndoREZ®-coated gutta-percha), and G5 (EndoREZ® sealer/gutta-percha). Push-out bond strengths of 18 root slices in each group were assessed at 2 weeks and the other 18 at 3 months after obturation using a universal testing machine. Data were analyzed using repeated measures ANOVA. An independent t test was used to compare the mean push-out bond strength for each group at 2 weeks and 3 months after obturation. RESULTS: The mean push-out bond strengths of G4 and G5 were significantly lower than those of G1, G2, and G3 (p < 0.05) at both 2 weeks (G1: 1.46 ± 0.29 MPa, G2: 1.74 ± 0.43 MPa, G3: 1.74 ± 0.43 MPa, G4: 0.66 ± 0.31 MPa, G5: 0.74 ± 0.47 MPa) and 3 months after obturation (G1: 1.70 ± 1.05 MPa, G2: 3.69 ± 1.20 MPa, G3: 2.84 ± 0.83 MPa, G4: 0.14 ± 0.05 MPa, G5: 0.24 ± 0.10 MPa). The mean push-out bond strengths of G2 (3.69 ± 1.20 MPa) and G3 (2.84 ± 0.83 MPa) were higher at 3 months compared to 2 weeks after obturation (G2: 1.74 ± 0.43 MPa, G3: 1.33 ± 0.29 MPa). CONCLUSION: The TotalFill BC™ obturation system (G2) and the TotalFill BC™ sealer/gutta-percha (G3) showed comparable bond strength to AH Plus®. Their bond strength increased over time, whereas the EndoREZ® obturation system (G4) and EndoREZ sealer (G5) had low push-out bond strength which decreased over time.

The effect of moisture conditions on the constitution of two bioceramic-based root canal sealers.

BACKGROUND/PURPOSE: Intraradicular moisture is not standardized and alters the sealing properties and adhesion of root sealers. The aim of this work was to evaluate the effect of different moisture on the constitution of bioceramic sealers. MATERIALS AND METHODS: The sealers were evaluated before mixing, and after setting using X-ray diffraction (XRD), Energy Dispersive Analysis (EDX) and Scanning Electron Microscope (SEM) techniques. Twenty four extracted teeth were prepared and assigned to four groups according to the moisture conditions: (1) dry: using ethanol as final irrigation, (2) normal: using paper points until the last one appeared dry, (3) moist: using a Luer adapter for 5 s followed by 1 paper point, and (4) wet: the canals remained totally flooded. The roots were filled with MTA Fillapex® and Endosequence® BC and kept in phosphate buffer solution at 37 °C for 10 days. Each root was sectioned transversally and longitudinally. The sealers harvested from longitudinal sections were analysed using XRD. Whilst the transverse sections were analysed using SEM/EDX. RESULTS: The XRD analysis showed MTA Fillapex composed of Bismuth trioxide, calcium silicate and tricalcium aluminate. The intensity of peaks in the wet condition was reduced. Endosequence BC contained mainly calcium silicate, calcium silicate hydrate, zirconia and calcium hydroxide. The wet condition showed a small increase in hydrated calcium silicate. The EDX analysis showed changes in the elemental concentrations with different moisture conditions. The surface morphology differed with different moisture conditions. CONCLUSION: Tested sealers have different constitution that not affected by the degree of moisture. However, it changed their relative quantity.

Bioceramic-Based Root Canal Sealers: A Review.

Bioceramic-based root canal sealers are considered to be an advantageous technology in endodontics. The aim of this review was to consider laboratory experiments and clinical studies of these sealers. An extensive search of the endodontic literature was made to identify publications related to bioceramic-based root canal sealers. The outcome of laboratory and clinical studies on the biological and physical properties of bioceramic-based sealers along with comparative studies with other sealers was assessed. Several studies were evaluated covering different properties of bioceramic-based sealers including physical properties, biocompatibility, sealing ability, adhesion, solubility, and antibacterial efficacy. Bioceramic-based sealers were found to be biocompatible and comparable to other commercial sealers. The clinical outcomes associated with the use of bioceramic-based root canal sealers are not established in the literature.

Interfacial adaptation and thickness of bioceramic-based root canal sealers.

This study evaluated and compared the sealer thickness and interfacial adaptation of bioceramic sealers (Sankin Apatite III, MTA Fillapex(®), EndoSequence(®) BC) to root dentin against AH Plus(®) sealer. Sixty extracted single-root premolars were prepared and equally divided into four groups. Sealers were labeled with 0.1% Rhodamine B fluorescent dye. Roots were dissected along the transverse plane at 1 mm (apical), 3 mm (middle), and 6 mm (coronal) levels. Sealer-to-whole canal area ratio was evaluated. Percentage of gap-containing region to canal circumference was calculated using a confocal laser microscope. Sealer thickness was significantly higher at apical and middle levels than at coronal level. EndoSequence BC had the significantly highest thickness compared with MTA Fillapex and AH Plus. The coronal level had significantly less interfacial gaps compared with apical and middle levels. Bioceramic sealers showed more gaps compared with AH Plus, with no significant differences among them.